Chisel Dip Solutions — Bond, Base, Activator, Top & Super Dip Base
Shipping: Shipping costs are calculated at checkout. View shipping policy
Returns & refunds: Please review our terms before ordering. View full policy
Chisel Dip Solutions — Choose Your Liquid & Size
Professional dipping liquids offered individually in five formula choices: #1 Prep/Bond, #2 Dip Base, #3 Activator / Sealer Dry, #4 Dip Top, and Super Dip Base. Choose the formula and size required for your service. Each selection is one bottle, not a five-bottle kit. The standard system has four numbered liquid steps; Super Dip Base is an alternative base, not a fifth step to apply after Top.
Formula Guide
- #1 Prep/Bond: The preparation/bonder liquid identified by Chisel as step #1 of its standard dipping system. Select this for the preparation stage before standard Dip Base. Follow the current bottle instructions for preparation and application.
- #2 Dip Base: The adhesive liquid that gives the nail a tacky surface to pick up dipping powder. Chisel directs an even coating followed by dipping into powder. Use this standard formula with the appropriate Activator stage; it is a different choice from Super Dip Base.
- #3 Activator / Sealer Dry: A solvent-based activating liquid that triggers polymerization and hardening of the dip adhesive/coating in the standard system. Apply a very small amount to the dipped nail. Keep the brush clean because the formula is sensitive to contamination from powder or adhesive. The photographed 0.5oz bottle bears the Cloud Nails Design label; the 2oz refill bears the Chisel label.
- #4 Dip Top: An adhesive-based finishing liquid that adds a glossy protective surface to dipped nails. Chisel identifies it as a dip-system topcoat rather than a UV/LED gel or conventional air-dry polish topcoat. For its standard procedure, the profile specifies application over dipped nails that have already received Activator; a second coat may be needed for a smooth finish.
- Super Dip Base — No Activator Required: An alternative adhesive that bonds the nail and dipping powder and hardens with the powder without a separate Activator. Chisel states that it removes the Bonder and Activator stages from the dipping process. Apply an even coating, then dip into powder. Choose this instead of standard #2 Base for that alternative method.
How the Systems Differ
Standard method: #1 Prep/Bond → #2 Dip Base with powder → #3 Activator → #4 Dip Top, following the current manufacturer procedure. This is a guide to the liquid roles, not a complete service protocol.
Super Dip Base method: Super Dip Base with dipping powder hardens without separate Bonder or Activator. Its profile does not specify the complete finishing sequence. The separate Dip Top profile describes use over an activated nail, so follow Chisel’s current finishing instructions for the Super Dip Base method rather than assuming that every topcoat hardens in the same way.
Size & Packaging
- 0.5oz: Retail brush-cap bottle; photographed labels state 15ml / 1/2 fl oz.
- 2oz: Refill format with pointed dispensing cap as photographed. Refill labels state Net Wt. 2oz (56g); no milliliter conversion is asserted for this weight-labelled format.
- Select one formula and one size. Powder and other liquid steps are sold separately.
Professional Use & Storage
For professional use. Follow the current label and safety data sheet for each selected liquid. Close caps tightly and keep away from direct sunlight, excess heat, flames and ignition sources. Chisel identifies Super Dip Base and Dip Top as flammable. Keep Activator away from the eyes and nose and keep its brush clean.
Chisel Dip Solutions — Chọn Loại Dung Dịch & Dung Tích
Dung dịch nhúng bột chuyên nghiệp, bán lẻ theo năm lựa chọn: #1 Prep/Bond, #2 Dip Base, #3 Activator / Sealer Dry, #4 Dip Top và Super Dip Base. Chọn đúng loại và size cần dùng; mỗi lựa chọn là một chai, không phải bộ năm chai. Hệ thông thường có bốn bước dung dịch được đánh số. Super Dip Base là lựa chọn thay Base thông thường, không phải bước thứ năm dùng sau Top.
Thông Tin Từng Loại
- #1 Prep/Bond: Dung dịch chuẩn bị/bonder được Chisel đánh số #1 trong hệ dip thông thường. Dùng ở giai đoạn chuẩn bị trước Base thường; thực hiện theo hướng dẫn hiện hành trên chai.
- #2 Dip Base: Dung dịch kết dính tạo lớp bám để bột dip bám lên móng. Hãng hướng dẫn thoa một lớp đều rồi nhúng vào bột. Loại Base thông thường này đi cùng giai đoạn Activator phù hợp, khác với lựa chọn Super Dip Base.
- #3 Activator / Sealer Dry: Dung dịch gốc dung môi giúp kích hoạt phản ứng polymer hóa và làm cứng lớp keo/lớp bột dip trong hệ thông thường. Thoa lượng rất ít lên móng đã nhúng bột. Giữ cọ sạch vì sản phẩm nhạy với bột hoặc keo lẫn vào. Chai 0.5oz trong ảnh mang nhãn Cloud Nails Design; chai refill 2oz mang nhãn Chisel.
- #4 Dip Top: Dung dịch phủ thuộc hệ dip, tạo bề mặt bóng và bảo vệ lớp móng đã nhúng bột. Hãng phân biệt đây là top hệ dip, không phải top gel UV/LED hay top sơn thường khô tự nhiên. Trong quy trình thông thường, tài liệu chỉ dẫn thoa lên móng đã dùng Activator; có thể cần lớp thứ hai để bề mặt mịn hơn.
- Super Dip Base — Không Cần Activator: Lựa chọn keo base thay thế, giúp bám móng và bột, tự cứng khi kết hợp với bột dip mà không cần Activator riêng. Chisel ghi rõ có thể bỏ các giai đoạn Bonder và Activator trong quy trình nhúng bột này. Thoa một lớp đều rồi nhúng vào bột. Chọn loại này thay #2 Base thông thường khi thực hiện phương pháp Super Dip Base.
Phân Biệt Hai Quy Trình
Hệ thông thường: #1 Prep/Bond → #2 Dip Base kết hợp bột → #3 Activator → #4 Dip Top, theo quy trình hiện hành của hãng. Đây là tóm tắt vai trò các dung dịch, không phải hướng dẫn dịch vụ đầy đủ.
Hệ Super Dip Base: Super Dip Base kết hợp bột sẽ cứng mà không cần Bonder hay Activator riêng. Tài liệu Super Dip Base chưa mô tả đầy đủ phần hoàn thiện. Tài liệu Dip Top riêng lại hướng dẫn dùng trên móng đã có Activator, vì vậy cần theo hướng dẫn hoàn thiện hiện hành của Chisel cho hệ Super Dip Base; không mặc định mọi loại top đều khô giống nhau.
Size & Quy Cách
- 0.5oz: Chai có nắp cọ; nhãn chai trong ảnh ghi 15ml / 1/2 fl oz.
- 2oz: Chai refill nắp vòi nhọn như ảnh gốc. Nhãn ghi khối lượng tịnh 2oz (56g); không quy đổi thành ml đối với quy cách ghi khối lượng này.
- Mỗi lựa chọn gồm một loại dung dịch và một size. Bột và các bước dung dịch khác bán riêng.
Sử Dụng Chuyên Nghiệp & Bảo Quản
Dành cho thợ chuyên nghiệp. Làm theo nhãn và phiếu an toàn của từng loại dung dịch. Đậy chặt nắp, tránh nắng trực tiếp, nhiệt cao, lửa và nguồn phát tia lửa. Chisel xác định Super Dip Base và Dip Top là sản phẩm dễ cháy. Không đưa Activator gần mắt hoặc mũi; giữ cọ sạch.
